APPLICATION
FOLLOW THE INSTRUCTIONS IN THIS VIDEO TO LEARN HOW TO APPLY EACH ONE OF OUR PRODUCTS.
Over 10 years we help companies reach their financial and branding goals. Engitech is a values-driven technology agency dedicated.
411 University St, Seattle, USA
engitech@oceanthemes.net
+1 -800-456-478-23
FOLLOW THE INSTRUCTIONS IN THIS VIDEO TO LEARN HOW TO APPLY EACH ONE OF OUR PRODUCTS.
Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.
Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.
Clear any remaining dust, dirt, grease, debris, and any other material that may prevent proper adhesion.
Do not apply if there is a forecast of rain in the next 48 hours or if it rained 48 hours prior to application. Ideal temperature for application is between 40ºF and 100ºF.
Add 1.4 gallons of water and mix thoroughly. Approximate Coverage 400 Sq. Ft. Apply by Roller or Airless Sprayer. Base Coating must be fully dry before applying RubberTop® Roof Coating.
Add 1.4 gallons of water and mix thoroughly. Approximate Coverage 400 Sq. Ft. Apply by Roller or Airless Sprayer. Base Coating must be fully dry before applying RubberTop® Roof Coating.
Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.
Use reinforcing fabric cut in 6 inch wide strips, all across damaged area.
Allow repairs to dry before applying RubberTop® Roof Coating.
Apply by Roller or Airless Sprayer. Do not add water!
Apply first coat: Apply coatings evenly taking stroker in one direction, going North and South or East and West.
Recoating: After first coat is fully dry, apply second coat at a right angle to the first coat. If you went North and South the first time, go East and West the second.
MUST APPLY A MINIMUM OF 2 COATS
Apply by Roller or Airless Sprayer. Do not add water!
Apply first coat: Apply coatings evenly taking stroker in one direction, going North and South or East and West.
Recoating: After first coat is fully dry, apply second coat at a right angle to the first coat. If you went North and South the first time, go East and West the second.
MUST APPLY A MINIMUM OF 2 COATS